#### [[返回文档目录]](../index.html) [[查看原始页]](../content/Debian%20Wheezy%20Raspberry%20Pi%20minimal%20image.html) # Debian Wheezy Raspberry Pi minimal image [](http://www.linuxsystems.it/wp-content/uploads/2012/06/raspi.jpeg)（外链文件，未本地化）I made my own Raspberry Pi custom image based on Debian Wheezy. *（外链图片未本地化）* Features include: - A **minimal** Debian Wheezy installation (similar to a netinstall) instead of the outdated Squeeze packages - Disabled incremental updates, means apt-get update is much faster - Workaround for a kernel bug which hangs the Raspberry Pi under heavy network/disk loads - A custom 3.1.9+ kernel with latest raspberry pi patches - Latest version of the firmwares - Lower GPU ram usage (32MB) by default - 224MB of ram are available to the system now - A very tiny **107MB** image: even with a 2GB SD there is **a lot** of free space - ssh starts by default - The clock is automatically updated using ntp - IPv6 support - Just 7MB of ram usage after the boot Here is the link to **download** my custom image: [http://files2.linuxsystems.it/wheezy\_20120608.img.7z](http://files2.linuxsystems.it/wheezy_20120608.img.7z) *（外链文件未本地化）* You will have to extract the image with [p7zip](http://p7zip.sourceforge.net/): > 7za x wheezy\_20120608.img.7z Then flash it to your SD with dd: > dd bs=1M if=wheezy\_20120608.img of=/dev/sdX Finally, if you have an sd larger than 2GB, grow the partition with gparted (first move the swap partition at the end). The **root password** is raspberry. [](http://www.linuxsystems.it/wp-content/uploads/2012/06/raspiroot.png)（外链文件，未本地化） *（外链图片未本地化）* You will have to reconfigure your timezone after the first boot: > dpkg-reconfigure tzdata The keyboard layout: > dpkg-reconfigure console-data And the localization: > dpkg-reconfigure locales It’s done, I hope you will enjoy it. Edit: I also released a [Raspbian Wheezy armhf minimal image](http://www.linuxsystems.it/2012/06/raspbian-wheezy-armhf-raspberry-pi-minimal-image/) with hardfp binaries.